Set of spacers (6), adapter and the trailing arms to give your 1, 2, 3 or 4 series the geometry of an M2, M3 or M4. (This particular set uses OEM trailing arms which are more readily available, but more expensive)
With this set of trailing arms, your wheels will be slightly further out and add some camber and caster. This provides:
- More grip due to more camber and caster on the front axle
- Better alignment for sportive use (more camber and camber gain due to the extra caster)
- the extra caster causes the steering wheel to center a little harder
- more feeling in the steering wheel by using harder rubber and ball bearing
With this set a standard suspension goes from 1 degree camber to 1.5 degrees. Ideal for sporty street use and better than standard for your trackdays.
Note: The standard F2x-F3x have different length wishbones left and right, the F8x does not. With installation of these arms you will get a difference in camber between left and right (+/- 0.5 degrees). Also, because of the extra caster, the wheel will be slightly forward in the wheel well.
After installation the car should always be aligned.
Contact us for mounting, in case of no stock usually quick delivery.
The valencia orange M140i in the picture is on an original chassis with the LCA upgrade without spacers.
