Set of spacers (6), adapter and the wishbones to give your 1, 2, 3 or 4 series the geometry of an M2, M3 or M4.
This set of wishbones will put your wheels a little further out and add some camber and caster. This provides:
- more grip by more camber and caster on the front axle
- Better alignment for sportive use (more camber and camber gain due to the extra caster)
- the extra caster causes the steering wheel to center a little harder
- more feeling in the steering wheel by using harder rubber and ball bearing
With this set a standard suspension goes from less than 1 degree of camber to about 1.5 degrees. Ideal for sporty street use and better than standard for your trackdays.
Also caster is increased and this causes the wheel to be a bit forward in the wheel well. if you want to correct this, we recommend installing the recommended powerflex bushing in the trailing arms.
Note: The standard F2x-F3x have different length trailing arms on the left and right, the F8x does not. With installation of these arms you will get a difference in camber between left and right (+/- 0.5 degrees).
After installation the car should always be aligned.
Contact us for installation, if not in stock usually quick delivery.
The valencia orange M140i in the picture is on original suspension with the LCA upgrade without spacers.
